Plumbers in Workington, Cumbria

Small plumbing jobs in Workington: get taps, stop taps and valves fixed

Small jobs include a dripping tap, a stiff stop tap or a leaking valve. Fill in the short form with the whole list and choose a call back time. A local plumber rings then with a free quote for the lot.

Tell a Workington plumber the job

Takes a minute. Small jobs welcome.

By sending this form you agree to your details being shared with a local plumber so they can contact you. See our privacy notice.

  • Dripping, stiff and wobbly taps repaired or swapped
  • Seized stop taps freed or replaced
  • Garden taps fitted for the hose
  • Several small jobs priced as one visit

Why small plumbing jobs are hard to get done

It is easy to put them off. It is only a tap. It is only the toilet upstairs, and you know the knack with the handle. It is only a drip from the pipe outside, and it stops in summer.

Then you try to get it fixed and find out why it never was. The first plumber is booked solid with bathrooms. The second says he will pop round and never does. Nobody is rude about it. The job is simply not worth the diesel.

So the list on the fridge gets longer, and one day a small job turns into a big one. The tap will not turn off at all. The stop tap you need to shut is the one that seized years ago.

Plumber in black work trousers with knee pads and a navy fleece, kneeling at the open cupboard under a kitchen sink, working on the white plastic waste pipe, with a red bucket and a black tool bag on the floor

How getting a quote works

  1. Fill in the short form

    Name, phone number, which part of Workington, and the job. No need for the right words. "Gauge on the boiler reads nothing and the taps run cold" is spot on. Flick the emergency switch if water is escaping.

  2. Choose a time and pick up when the plumber rings

    A plumber who covers Workington calls at the time you asked for. They will want to know what sort of boiler or fitting it is, how long it has been playing up and what you have tried.

  3. Get a free quote and decide

    You hear what the work is likely to cost and how soon it can be done. Take it, turn it down or sleep on it. Asking is free, and nobody chases you for an answer.

How to make a small job worth a plumber's while

Think about it from the plumber's side. A plumber has to drive over, park, carry the tools in, do the work, clear up and drive off. For a ten-minute job most of that hour is travel, and it has to be charged for.

One UK dripping tap guide puts a plumber's labour and call-out for the first hour at £50 to £120. That first hour is the real cost of a small job. The washer is pence.

So fill the hour. Walk round the house with a pencil before you fill in the form.

  • Every tap: does it drip, wobble or take both hands to turn?
  • Every toilet: does it run on, fill slowly or need a second flush?
  • The stop tap: does it turn, and does the water stop when it does?
  • Under each sink: is anything damp, green or crusty?
  • Outside: is the overflow pipe dripping, or the garden tap leaking at the wall?

Four jobs in one visit cost a good deal less than four visits. And a plumber is far keener to come for a full morning than for one washer.

Guide prices for the usual small jobs

Pick a job and the calculator shows the range from a published UK cost guide, with a published UK cost guide.

Get a real price for this job

Takes a minute. Small jobs welcome.

By sending this form you agree to your details being shared with a local plumber so they can contact you. See our privacy notice.

All fourteen prices side by side

JobUK guide price
Dripping tap mendedThe guide's all-in figure for the UK outside London and the south east, VAT included. It prices a washer or O-ring at £50 to £70 and a valve seat repair at £90 to £140.£50 to £150typical about £100
Old tap swapped for a new one, like for likeTap and fitting together. The guide lists £80 for a pillar tap, £100 for a basin mixer, £110 for a kitchen mixer and £130 for a bath filler.£80 to £130
New stop tap inside the houseA manual indoor stop tap, supplied and fitted. The guide gives £150 as the average and says one out at the property boundary costs more.£100 to £200typical about £150
Garden tap put inThe full job in the guide's words: an outside tap with the new pipework it needs.£120 to £200

Every figure is a typical UK price printed in a published UK cost guide. Not one of them is a quote for your home. What you pay in the end turns on how easy the fault is to get at, what parts it needs, how long it takes and the hour of the day you want it done.

Taps: three faults and what cures them

It drips from the spout

On a tap you turn several times, the rubber washer has worn. On a lever or quarter-turn tap, the ceramic cartridge has. Both parts can be changed without changing the tap.

It leaks round the handle or the base

A small rubber ring inside has perished. You tend to notice it as a puddle on the worktop behind a kitchen mixer. Left alone, it swells the chipboard underneath.

It is loose, seized or plain worn out

A tap that spins on the sink needs its back nut tightening, which is fiddly more than hard. A tap with the plating gone or the body cracked is ready to be swapped. A UK cost guide says most like-for-like tap swaps take about an hour.

The stop tap: the small job that matters most

If you fix one thing on this page, make it this. The stop tap shuts off all the water coming into the house. United Utilities says it is usually under the kitchen sink or in a downstairs toilet, and that keeping it working is the householder's job.

Try yours today. Turn it clockwise by hand, then run the cold tap in the kitchen. The flow should die away to nothing. If the handle will not move, or the water keeps coming, do not force it with grips. A snapped spindle is a flood.

A plumber can fit a new one, often with a lever handle that a child could work. The valve you sometimes see under a cover in the pavement is a different thing. United Utilities says those belong to the water company and are not meant for customers to use.

Garden taps: what to ask for

A tap on the back wall earns its keep quickly: the car, the bins, the dog, sandy boots after the shore at Harrington. The plumber tees into the cold pipe indoors, usually under the kitchen sink, and takes a short pipe through the wall.

Ask for two things. One is a non-return valve, so water standing in a hose cannot be drawn back into the drinking supply. The other is a shut-off valve on the inside, so the tap can be closed down and drained when frost is forecast. A tap on an exposed gable gets the full force of a winter wind off the sea.

Other odd jobs worth adding to the list

  • Isolating valves fitted on the pipes to taps and toilets, so one fitting can be shut off alone
  • A dripping overflow pipe traced back to the float valve that caused it
  • A radiator valve that weeps when the heating is on
  • A loose toilet seat or a pan that rocks on the floor
  • A washing machine or dishwasher plumbed in, covered on the kitchen plumbing page

Plumbing jobs in Workington

Workington, both banks of the Derwent, and nearby

Plumbing help for every part of Workington and the towns and villages a short drive away.

  • Workington town centre
  • Moorclose, Mossbay and Salterbeck
  • Westfield, Frostoms and Banklands
  • Stainburn, Ashfield and Derwent Howe
  • Northside, Barepot and Oldside
  • Seaton
  • Harrington and High Harrington
  • Siddick
  • Flimby
  • Great Clifton and Bridgefoot
  • Distington
  • Maryport
  • Cockermouth
  • Whitehaven

All the places covered around Workington

Four things to know before you ask for a quote

  • Asking costs nothing. No charge for the form and no charge for the phone call. You only ever pay a plumber, and only for work you have agreed to.
  • Four things to type. Your name, a phone number, your area and the job. Nobody wants your email, your door number or a password.
  • Prices from published guides. Any figure on these pages was read in a published UK cost guide. Your own price comes from the plumber, once they know the job.
  • One use for your number. It is there so a plumber can ring you about this job. It does not end up on a sales list.

Common questions

Do plumbers have a minimum charge?

It varies from one plumber to the next, and most have one. The nearest published figure is in the UK guide dripping tap guide, which prices a plumber's labour and call-out for the first hour at £50 to £120. Ask what the minimum is when the plumber rings, and have enough small jobs ready to fill the time you are paying for.

Will anyone really come out for one tap washer?

Some will and some will not, which is why it pays to ask through a form that reaches plumbers working in Workington already. You improve your chances a great deal by listing every small job in the house and by being flexible on the day. A plumber can then slot you in beside another call nearby.

Should I buy the new tap myself?

You can, and it lets you choose the look. Tell the plumber first what it is going on. A sink or basin has one hole or two, and the pipes beneath are a set size, so not every tap fits every fitting. A photo of the old tap and of the pipes under it saves a wasted trip.

Small jobs do not stay small

A drip scores the inside of a tap until no washer will seal it. A weeping valve rots the floor it sits over. A stop tap left seized is no help on the one night you need it. None of these costs much to put right now, and all of them cost more the longer the list stays on the fridge.

Write down every small job, not only the worst one, and add your part of Workington. Nobody charges you for a price.

Tell a Workington plumber the job

Takes a minute. Small jobs welcome.

By sending this form you agree to your details being shared with a local plumber so they can contact you. See our privacy notice.

Get a free quote